SGM2588EYN5G--Power Distribution Switch

3K一盤  

GENERAL DESCRIPTION

The SGM2588 is an integrated 100mΩ (TYP) power switch for self-powered and bus-powered universal series bus (USB) applications.

The SGM2588 is internally current limited and has thermal shutdown that protects device and load from over-current damage. Thermal shutdown shuts off the output MOSFET and asserts the nFAULT output if the die temperature exceeds +150℃, and the output MOSFET remains off until the die temperature drops to +130℃.

This device employs soft-start circuit that minimizes inrush current in applications where highly capacitive loads are employed.

An open drain nFAULT flag asserts low during over-current and thermal conditions after a 13ms blanking time to prevent false reporting.

SGM2588 is available in a Green SOT-23-5 package. It is rated over the -40℃ to +85℃ temperature range.

FEATURES

• 100mΩ (TYP) High-side N-Channel MOSFET

• Three Current Limit Levels

    SGM2588E/F/K: 2600 ± 300mA

• Input Voltage Range: 2.5V to 5.5V

• Quiescent Current: 23μA (TYP)

• Shutdown Current: 0.1μA (TYP)

• Soft-Start Function

• Thermal Shutdown Protection

• Under-Voltage Lockout Protection for VIN

• No Reversed Leakage Current (Reverse Blocking)

• Fault Flag (nFAULT) with 13ms Filter Eliminates False Assertions

• Automatic Output Discharge in Shutdown Mode (SGM2588A/B/C/D/E/F)

• 500kΩ Pull-Down Resistor at EN Pin (SGM2588G/I/K)

• Evaluated to IEC 60950-1, Ed 2, Am1, Annex CC, Test Program 1 with CB Report (SGM2588A/C/E/G/I/K)

• Available in a Green SOT-23-5 Package